Solid wood composite floor clean

When cleaning, can be used to clean the broom to sweep the dust and debris, and then wring dry cloth to wipe water artificial, as the area is too big, can be washed clean and Butuo, hanging up to drip drip, used to haul the net surface. The cut can not be washed with water, also cannot use the wet dishcloth or mop cleaning. Usually if there is a material containing water splashing on the ground, should immediately with a dry cloth wipe dry. If conditions permit, can also to strengthen the protection of the floor of the interval of time to play a floor wax. The paintwork if damaged, can oneself with common varnish up or ask the manufacturer for repair.

Composite wood floor maintenance

1 keep the floor dry, clean, do not allow the use of dripping mop the floor, or with alkaline water, soap and water clean, to avoid damage to the paint surface gloss; if the air is dry in the home, the mop can be wet some or put a basin of water in the heating or humidifier humidification.

2, try to avoid sun exposure, so as not to paint on the surface of the long-term in the ultraviolet irradiation of premature aging, cracking;

3 the local board inadvertently accounted for 5 of the dye stains should be removed promptly, if there is oil, use cloth dipped in warm water with a small amount of washing powder washing, if the drug or pigment, must in the end surface stains such as lignin removed before infiltration;

The 4 floor as far as possible to avoid contact with water for a long time, especially not in contact with hot water, therefore, once the hot water on his floor, should be promptly wiped away;

The 5 best every three months at a wax, to the floor surface stains clean before waxing. In fact, don't play can be, but often waxing, can keep the floor finish, prolong the service life of the floor;

6 avoid sharp objects scratch the surface, do not throw cigarette butts or directly placed too hot things on the floor, as far as possible to avoid dragging heavy furniture.

A: None