The wooden window acceptance notice

The surface of the wooden window film to be smooth, shiny, no flow drop, bubbles, wrinkles and other defects, no corrosion, dead, broken; package use wood window and door and window sash shall be wood, color coordination, veneer and wooden line color is not big, should be the same tree species.

The window sash to founder, warping deformation can not just fits in the window frame, the window sash and the window frame, consistent and, if the window sash and frame gap, mainly because of the installation plane repair forbid or window frame and the ground is not vertical, but the window sash disassembled plane repair, such as the window frame is not vertical, should be in the frame plate gasket for straight.

The hinge to position accurately, firm installation, if the hinge is not positive, it will lead to the window sash is not in agreement with the box cover, window switch is not smooth. Each can be turned to a screw, fit and then adjust the sash and frame, adjust and repair to tighten all screws. If the hinge screw short, or when you screw nails, no screw or screw twist angle, will cause the window sash to play around. Should change the appropriate screw, screw must be straight, screws should be first nail into the 1/3, the rest of the screw.

Inside the window should have basic materials, window joinery board or MDF production, should first basal plate is fixed on the window frame base on keel, and nail lines; knock on the window side panel, if a empty drum, that means the bottom without pad joinery board base plate, should remove redo.